E-mail: dongrun@dongruncasting.com

                      Quality Control

                      During many of procedures and upon completion of all the machining operations, Dongrun Casting performs high quality policy to ensure the manufactured part to meet customers’ demands.

                      We use a variety of testing instruments including "go or no-go" gauges, micrometers, height gauges, calipers, thread gauges, bore gauges and ring gauges. We test and certify these gauges regularly.

                      We also have a specialized unit for pressure testing our castings. It measures pressure loss for castings that will be used in liquid or air applications. This testing and certification is also available to our customers with their shipped product.

                      Dongrun Casting also has full CMM capabilities and can supply this data to our customers with their 1st article reports. This CMM has greatly reduced our time in measuring new and full production parts and allows us to measure dimensions that would be difficult otherwise.

                      Specific casting control measures include: Heat Treat Certification, Hardness Testing, First Article Inspection.

                      About the raw material, it is very important for casting. Before casting, we will do testing bar to check the Chemical composition and Mechanical properties. In our raw material warehouse, we are doing the marks on each type material. Free from the mistake when the workers melt the raw material.


                      CMM.jpgtensile-test-machine.jpgspectrometer.jpg
                                   CMM                           Tensile Test Machine                           Spectrometer             



                      hardness-machine.jpgfractograph-analysis.jpg
                      height-gauges.jpg
                                   Hardness Machine              Fractograph Analysis                          Height Gauges             



                      go-and-no-go-gauges.jpgcalipers.jpg
                       
                                   Go and No Go Gauges                           Calipers              



                      亚洲 中文 字幕永久免费 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>